Most people prefer to repair small drywall holes by themselves. It can turn out to be an interesting DIY project. You can search for drywall repair near me in lawrenceville, ga, for larger holes since that requires more precision.
The procedure to be followed for repairing holes smaller than a nickel is straightforward. If you are planning to repair it on your own, you will require the below-given tools to do so.
Materials and tools used for drywall repair
Small holes can be repaired with just a putty knife, carpenter’s knife, spackle, and joint-compound. However, if you end up wanting to repair large holes, this is a comprehensive list of all the tools and materials you will require.
● 120-grit sandpaper
● Drywall saw
● Drywall tape
● Furring Strips
● Drywall Screws
● Dust mask
● Putty Knife
● Carpenter’s Knife
● Broad knife
● Drywall patch kit
● Pre-mixed joint compound
Tips for repairing drywall
Repairing larger holes is not a layman’s task. If you have mild experience and want to do it yourself, here are a few tips that will make the task easier for you.
● Sand a filler coating only when it is completely dry.
● Always have a dust mask or a vacuum handy while sanding.
● Apply the second or third coating for a smooth look, but only after the layer underneath is properly sanded.
● Spread the joint compound over a larger area than the hole so that you have some material to feather and blend.
● You should use a wall texture spray before applying paint if you are repairing a textured wall.
● Joint compound can not be painted over. Therefore, never skip priming.
● If you are using spackle for the repair, buy one that has a primer mixed in it. This is only advisable for small holes.
If you have the right tools, materials, and knowledge, repairing drywall is an easy job. It is a satisfying DIY job. You must hire a professional if you do not have the tools or if the area to be repaired is larger than 6-inches.